TI PCM4222 ADC Now Available

PCM4222:

TI's 24 bit, 216 kHz, 2 channel ADC is now available. 122 dB dynamic range is claimed. The part comes in a 48 pin TQFP package. It is available from Digi-Key in single quantities at $22.42 each.

Here is the link: PCM4222

This is a FFT plot of the PCM4222 at 192 kHz with no input:

The rise in amplitude at about 65 kHz is a concern, but for SDR use a bandwidth of 130 kHz would still be useful.

The PCM4222 is definitely easier to get in single quantities for experimenters than the AKM AK5394 is, but the AKM chip is still probably the winner.

Comments

History of HPSDR Mercury and Quick Silver

History of HPSDR Mercury and Quick Silver Philip Covington, N8VB Early HPSDR and XYLO In 2005 I started a High Performance SDR (HPSDR) project which was to consist of a motherboard carrying a FPGA/USB 2.0 interface and power supply with the provision for plug in modules through 40 pin headers. I had planned a narrow band high dynamic range module based on a QSD/DDS/PCM4202 audio ADC and a wide bandwidth module based on a high speed 16 bit ADC: http://www.philcovington.com/SDR/PICS/HPSDR_FPGA_USB_Board_top1_800600.jpg http://www.philcovington.com/SDR/PICS/HPSDR_FPGA_USB_Board_top4.jpg I soon selected the LTC2208 ADC from Linear Technology. A representative from Linear Technology came across my blog ( http://pcovington.blogspot.com/ ) and offered evaluation boards and samples to support the project. At about the same time my HPSDR project came about, Phil Harman, VK6APH and Bill Tracey, KD5TFD were interested developing a sound card replacement to be used with the SD

QuickSilver QS1R Software Defined Receiver Prototype

QS1R Software Defined Receiver: (Click on picture above for larger version.) Features: 16 bit 130 MSPS ADC HPF, LPF, RF AMP Switchable Front End 0-31.5 dB Attenuator in 0.5 dB steps Cyclone II FPGA Two AD6620 DDC co-processors USB 2.0 480 Mbps High Speed Interface to PC 0.1 to 33 MHz coverage (0.1 to 65 MHz extended) RX bandwidths from 33 MHz to 1kHz Two independent RX channels anywhere in 0.1 to 33 MHz 6.00" X 4.00" board size Single +12V 1A supply Open Source Software and Hardware Availability: Projected late January to mid-February 2007

Philip A Covington’s Blog

Search This Blog